CareFusion Smoke Check Meter Especificaciones descargar pdf (Pagina 11)



Operation

For accurate results the CO meter should be used at room

temperature. If the instrument has been stored in cool or hot

conditions then allow time to reach room temperature prior to use

Install the PP3 battery by sliding open the battery cover, clipping the

battery in place and replacing the cover. Insert the mouthpiece

adapter into the MicroCO meter and then insert a disposable

mouthpiece into the adapter. Turn the unit on by selecting the

upper or middle position on the central slide switch and the display

will show the software version number.

This will appear momentarily whilst correction for ambient levels is

executed. During this time the unit must not be exposed to raised

concentrations of CO. The buzzer will then sound and the display

will change to:

Upon hearing the buzzer instruct the subject to inspire fully and hold

their breath for 20 seconds. The display will count down from 20 to

0 as an aid to timing the breath holding period. The green indicator

will then illuminate and the display will change to:

BLOW

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 83 84

Sin comentarios

CareFusion Smoke Check Meter Especificaciones Pagina 11